Trans A.D.M.   |   Transpalux   |   Heinrich Schwertransporte
International Transport Solutions

Vessel bridges

For especially high loads up to 150 to, we have two vessel bridges. With these, it is possible to lower the load to a ground clearance of a few centimers only, allowing to pass e.g. problematic bridges.



150-to-vessel bridge
Base length 7,20 m, extendible to 25,80 m
Loading height 22 cm m (min. 10 cm, max. 52 cm)
Inside width min. 2,20 m, max. 5,20 m
Payload 150 to

120-to-vessel bridge
Base length 7,20 m, extendible to 25,80 m
Loading height 22 cm m (min. 10 cm, max. 52 cm)
Inside width min. 2,20 m, max. 3,90 m
Payload 120 to

Lift-lever vessel bridge
On transport routes with narrow turns, we use a lift-lever vessel bridge. This equipment does not form a rigid unit with the heavy-duty modules – the bridge is laying on 2 separate bogies. The load can be lifted to 1,30 m to pass over e.g. crash-barriers.
 
Base length 3,00 m, extendible to 24,00 m
Loading height 10 cm (min. 0 cm, max. 130 cm)
Inside width min. 2,20 m, max. 5,30 m
Payload 150 to